Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
S-3.3, r. 2 - Regulation respecting rail safety
Section 80
Disposition versions
80. The outer edge of a wheel tread may not contact the gauge side of a spring wing rail.
The toe of each wing rail must be tightly bolted. Each spring must have a tension sufficient to hold the wing rail against the point rail.
The clearance between the hold-down housing and the horn may not be more than 0.63 cm (1/4 in.).
Each frog with a bolt hole defect or head-web separation must be replaced.
